ES Curve: Difference between revisions

From National Optronics resources center
Jump to navigationJump to search
No edit summary
No edit summary
Line 15: Line 15:
=Software=
=Software=


== Version 3.01 ==
== Version 3.01 (not yet released) ==
;New features
;Download
;Download
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20Setup-V3.01.exe (download)]
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20Setup-V3.01.exe (download)]
*Conversion scripts from version 2.xx [http://nationaloptronics.net/download/ES_Curve/software/scripts.zip (download scripts)] [http://nationaloptronics.net/download/ES_Curve/procedure/IncicamToNOPcam.pdf (download procedure)]
*Conversion scripts from version 2.xx [http://nationaloptronics.net/download/ES_Curve/software/scripts.zip (download scripts)] [http://nationaloptronics.net/download/ES_Curve/procedure/IncicamToNOPcam.pdf (download procedure)]


 
== Version 2.03 ==
== Version 2.03.05 ==
;New features
*  Allow connection to TCP/IP host using "Local" method.
*  Updates to material default values.
*  1/8 inch, 1 flute mill is now rough-only.
;Download
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20Setup-V2.03.05.exe (download)]
 
== Version 2.03.04 ==
;New features
*  Increase allowed job number length to 20 characters.
;Download
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20Setup-V2.03.04.exe (download)]
 
== Version 2.03.01 ==
;New features
*  Mist action on EOB according to Mist checkbox on the material screen (“ShelvingMist=x” on [Tool__Material__] into OPTOPARAMS.INI)
*  Faster shelving tool path calculation.
*  Includes the latest version of the Frame Editor
;Bugs fixed
*  Fixed minimum bevel distance from FRONT when using Hi-Wrap 2 cutter.
*  Fixed request “scan inside 2mm” in the event that the PLC does not detect the probe tips run out of the lens while data analysis reveal that probe reading is way off after one turn.
;Download
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20Setup-V2.03.01.exe (download)]
 
== Version 2.02 ==
;New features
*  Includes all new features issued since the release of v2.01 (Details under construction)
;Bugs fixed
*  Includes all new bug fixes issued since the release of v2.01 (Details under construction)
;Download
;Download
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20Setup-V2.02.exe (download)]
*Release document: [http://nationaloptronics.net/download/Helix/software/Incicam%20ReleaseNoteV2_03.pdf (download)]
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/Helix/software/HelixSetup.exe (download)]
* Compact flash binary file [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20RevB.zp2 (download)]
* Compact flash installer tools: [http://nationaloptronics.net/download/G3/software/Automation%20Net%20PVI%20Runtime%20V3.0.0.exe PVI runtime] + [http://nationaloptronics.net/download/G3/software/Automation%20Net%20PVI%20Transfer.exe PVI transfer]

Revision as of 21:18, 4 October 2012

Documentation

Manuals

English

ESCurve Manual (download)

Procedure Documents

  • ESCurve Calibration Summary (download)
  • ESCurve Installation Requirements (download)
  • ESCurve Probe Replacement Instructions (download)
  • ESCurve Probe Replacement Instructions .PDF version (download)
  • ESCurve Automation, Setting Vacuum Sensor Level (download)

Software

Version 3.01 (not yet released)

Download

Version 2.03

Download
Retrieved from "https://www.nationaloptronics.net/index.php?title=ES_Curve&oldid=366"