Helix: Difference between revisions

From National Optronics resources center
Jump to navigationJump to search
No edit summary
No edit summary
Line 8: Line 8:


=Software=
=Software=
== Version 2.02.33 ==
;New features
*  UI - Flush trays that have no shape data.
*  UI - Add debug mode, that will load the last job at startup.
*  UI - Change maintenance screen text for clean machine button.
;Bugs fixed
*  UI - Properly handle downloaded groove width/depth that is out of range.
*  UI - Allow 'none' to be downloaded as the shelf tool selection.
*  UI - Fix problem with incorrectly downloaded shelf modifier.
*  Frame Editor - (PC mode only) The right and left edge type fields in the frame database contained no values if the frame was originally created some time ago in an old version. This condition caused the frame type to always revert to metal. New startup code has been added that looks for and corrects this issue if it exists.
*  Frame Editor - (PC mode only) Bevel was not being listed as a shelf position choice on the job screen when the frame was metal or plastic.
*  Frame Editor - (PC mode only) The allowable range for the shelf modifier on the job screen has been increased when millimeter reference is being used rather than percentage. The allowable range is now -20.0 to +20.0.
*  Incicam - Fix bevel spiral width that was not consistent with differential value specified on the UI
*  Incicam - Removed “Over-material for Rough edging” and “Probe Tip Radius” from ctrl-L menu.
;Download
*Package Installer: PLC + UI + Frame editor [http://nationaloptronics.net/download/ES_Curve/software/ES_Curve%20Setup-V2.02.33.exe (download)]


== Version 2.02.32 ==
== Version 2.02.32 ==

Revision as of 21:20, 18 July 2011

Documentation

Manuals

English

Technical information

  • Sorry no procedures are available

Software

Version 2.02.33

New features
  • UI - Flush trays that have no shape data.
  • UI - Add debug mode, that will load the last job at startup.
  • UI - Change maintenance screen text for clean machine button.
Bugs fixed
  • UI - Properly handle downloaded groove width/depth that is out of range.
  • UI - Allow 'none' to be downloaded as the shelf tool selection.
  • UI - Fix problem with incorrectly downloaded shelf modifier.
  • Frame Editor - (PC mode only) The right and left edge type fields in the frame database contained no values if the frame was originally created some time ago in an old version. This condition caused the frame type to always revert to metal. New startup code has been added that looks for and corrects this issue if it exists.
  • Frame Editor - (PC mode only) Bevel was not being listed as a shelf position choice on the job screen when the frame was metal or plastic.
  • Frame Editor - (PC mode only) The allowable range for the shelf modifier on the job screen has been increased when millimeter reference is being used rather than percentage. The allowable range is now -20.0 to +20.0.
  • Incicam - Fix bevel spiral width that was not consistent with differential value specified on the UI
  • Incicam - Removed “Over-material for Rough edging” and “Probe Tip Radius” from ctrl-L menu.
Download
  • Package Installer: PLC + UI + Frame editor (download)

Version 2.02.32

New features
  • (PC Mode Frame Editor) Tool images on Setup Screen and Job screen replaced with higher resolution images
  • (PC Mode Frame Editor) Shelf modifier can now be edited even if the Shelf tool is set to None as long as shelf shape data is present.
  • (PC Mode Frame Editor) If Shelf tool is set to None, all known shelf data is now exported and _NOP_SHELF_TOOL=0;0 is now sent in the VCA data packet
  • (PC Mode Frame Editor) If there is no shelf shape data present all shelf related fields are now disabled on the job screen.
  • Shelf shape graphics display on all screens if shelf shape data is present, even if the shelf tool is set to None. This helps prevent the user from possibly destroying the position, size, and rotational relationship between the shape and shelf during the editing process.
  • (PC Mode only) Drop-down list functionality has been improved on the job screen.
Bugs fixed
  • Fixed FRAME shelving issue that could cause Incicam to close unexpected
Download
  • Package Installer: PLC + UI + Frame editor (download)

Version 2.02.31

New features
  • New daily log with JOB tilt reduction info
Bugs fixed
  • More conservative collision control on shelf mode 2
  • (PC Mode Frame Editor) Frame and lens edge type were being exported as unknown.
  • (PC Mode Frame Editor) Frame type name was being displayed in the frame list as unknown.
Download
  • Package Installer: PLC + UI + Frame editor (download)


Version 2.02.30

New features
  • none
Bugs fixed
  • Fixed blind twin slots depth issue. The second slot had a smaller depth.
Download
  • Package Installer: PLC + UI + Frame editor (download)

Version 2.02.29

New features
  • Major code changes to Frame Editor to move it closer to multiple language support.
  • Major changes to the code behind the Frame Editor drop down selection boxes on job screen.
Bugs fixed
  • Positioning of tools on the Frame Editor Tool Setup menu corrected.
  • Eliminate horizontal stretching of the tool image when displayed on the Frame Editor job screen.
Download
  • Package Installer: PLC + UI + Frame editor (download)

Version 2.02.28

New features
  • none
Bugs fixed
  • Fixed front curve evaluation on very flat lenses that was sometimes computed as negative, thus generating high tilt tool path.
  • Drill data rotation when running the Frame Editor on-board the Helix was not transferring to the UI. This has been corrected.
  • The default setting that allows the Frame Editor to handle multiple shelf segments was not defaulting to on. This has been corrected.
  • Corrections have been made in the tool availability list in the Tool Setup menu.
Download
  • Package Installer: PLC + UI + Frame editor (download)

Version 2.02.27

New features
  • Support for shelves with multiple segments
Bugs fixed
  • no data
Download
  • Package Installer: PLC + UI + Frame editor (download)

Version 2.02.26

New features
  • no data
Bugs fixed
  • no data
Download
  • Package Installer: PLC + UI + Frame editor (download)

Version 2.02.17

New features
  • no data
Bugs fixed
  • no data
Download
  • Package Installer: PLC + UI + Frame editor (download)
Retrieved from "https://www.nationaloptronics.net/index.php?title=Helix&oldid=210"